EasyCom Com Unit for PROFIBUS DP/DP-V1 FB8206H0630.3

Interface between the I/O modules and the PCS/PLC
Com unit for 80 analog or 184 digital channels
Communication via PROFIBUS DP
Installation in suitable enclosures in Zone 1
HART communication via PROFIBUS DP V1 or service bus
Configuration via FDT 1.2 DTM
Configuration in run (CiR) for any PCS
Non-volatile memory for configuration and parameter settings
Self configuration in redundant systems
Permanently self-monitoring
Outputs drive to safe state in case of failures

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Prodotti associati
Chiedi ad un esperto

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:

Estratto del Datasheet: Dati tecnici del FB8206H0630.3

Descrizione prodotto
EasyCom Com Unit for PROFIBUS DP/DP-V1

Slots
Occupied slots		2
Supply
Connection		backplane bus
Rated voltage		5 V DC , only in connection with the power supplies FB92**
Power dissipation		1.8 W
Power consumption		1.8 W
Fieldbus connection
Fieldbus type		PROFIBUS DP/DP-V1
PROFIBUS DP
	Connection	wired to Ex e terminals via backplane
	Baud rate	up to 1.5 MBit/s
	Protocol	PROFIBUS DP/DP V1 read/write services
Number of stations per bus line		max. 125 (PROFIBUS), max. 119 (service bus)
Cyclic process data		240 bytes input and (simultaneously) 240 bytes output
Number of stations per bus segment		max. 31 (RS-485 standard)
Number of repeaters between Master and Slave		max. 3
Supported I/O modules		all FB remote I/O modules
Configuration (240 bytes I/O)		Standard: 80 analog, 184 digital Universal 2I2O: 48 analog, 184 digital Universal 4I4O: 60 analog, 120 digital
Bus length		max. 1000 m (FOL, 1.5 MBaud), max. 1000 m (copper cable, 187.5 kBd), max. 200 m (copper cable, 1.5 MBd)
Addressing		via configuration software
PROFIBUS address		0 ... 126 (factory standard setting: 126)
GSE file		PFV61711.gsd/gse
HART communication		via PROFIBUS or service bus
Internal bus
Connection		backplane bus
Redundancy		via front connector
Indicators/settings
LED indication		LED green (power supply): On = operating, fast flash = cold start, slow flash = HCIR loading active LED red (collective alarm): On = internal fault, flashing = no PROFIBUS connection LED yellow (operating mode): flashing 1 (1:1 ratio) = active, normal operation; flashing 2 (7:1 ratio) = active, simulation
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Fieldbus standard		IEC 61158-2
Environmental test		EN 60068-2-14
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Damaging gas		EN 60068-2-42
Relative humidity		EN 60068-2-78
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		95 % non-condensing
Shock resistance		shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Vibration resistance		frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance
Damaging gas		designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protection		IP20 (module) , a separate housing is required acc. to the system description
Connection		via backplane
Mass		approx. 750 g
Dimensions		57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch)
Data for application in connection with hazardous areas
EU-type examination certificate		Presafe 19 ATEX 14058U
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 EN 60079-1:2014 EN 60079-5:2015 EN 60079-7:2015+A1:2018 EN 60079-11:2012
International approvals
ATEX approval		Presafe 19 ATEX 14058U
IECEx approval		IECEx PRE 19.0013U
	Approved for	Ex db eb q [ib] IIC Gb
General information
System information		The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate.
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210121
ECLASS 12.0	27210121
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: FB8206H0630.3

Informative Literature: FB8206H0630.3

Literature	Lingua	File tipo	Dimensioni
Application Report - Communication Redundancy for Uninterrupted Operation	ENG	PDF	529 KB
Application Report - LB and FB Remote I/O Systems for Digitally Connecting Analog Field Devices	ENG	PDF	208 KB
Application Report - Space Saving Extension for Existing Plants	ENG	PDF	300 KB
Application Report - Using Remote I/O Systems for the Efficient Digitalization of Plants	ENG	PDF	371 KB

Product Documentation: FB8206H0630.3

Brief Instructions	Lingua	File tipo	Dimensioni
Brief Instructions - Firmware update	ENG	PDF	5602 KB
Safety and Security Documentation
Manuale di istruzioni	ITA	PDF	179 KB
Manuals
Manual for LB8106/FB8206 EasyCom com unit for PROFIBUS DP/DP-V1	ENG	PDF	8283 KB
Hardware Manual FB-Remote-I/O-System	ENG	PDF	9157 KB

Design / Simulation: FB8206H0630.3

CAD	Lingua	File tipo	Dimensioni
CAD 3-D / CAD 3-D	ALL	STP	7022 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	1267 KB

Approvals: FB8206H0630.3

Certificates	Certificato Numero	Lingua	File tipo	Dimensioni
Brasil TUV Rheinland Brazil	TÜV 19.0480 U	ALL	PDF	1258 KB
China SITIIAS CCC Ex Certificate	2021322310004115 (Mannheim)	ALL	PDF	2333 KB
Europe Presafe DNV GL II 2(1)G I (M1) ATEX II (1) D	Presafe 19 ATEX 14058U	ALL	PDF	607 KB
Presafe DNV GL IECEx Certificate of Conformity	IECEx PRE 19.0013U	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-4263DITA	ITA	PDF	1139 KB
UK Declaration of Conformity (P+F)	TDOC-6753_ENG	ENG	PDF	1110 KB

Software: FB8206H0630.3

Device Description Files/Drivers	informazioni sulla liberatoria	File tipo	Dimensioni
GSE 1711 / GSD 1711	1.13	ZIP	26 KB
Firmware
Firmware for Comm Units 8x06 / Firmware für Buskoppler 8x06	6.30	ZIP	1655 KB
Firmware for Comm Units 8x06 / Firmware für Buskoppler 8x06	6.29	ZIP	1648 KB
Service-Tool / Service-Tool	3.00.0003	ZIP	5185 KB
Software Tools
FHX-File (from FW 6.28) / FHX-Datei (ab FW 6.28)	Vers. 1.13	ZIP	22 KB
Tools to configure LB/FB Remote I/O without DTM / Tools zur LB/FB-Remote-I/O-Konfiguration ohne DTM	35/2010	ZIP	51019 KB

Prodotti associati : FB8206H0630.3

Accessories

	DTM LB/FB DTM collection
	Device DTM, For Remote I/O systems, Frame application, like e. g. PACTware, must be installed separatelypa

Informazione generale sul prodotto

Link diretti

Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
phone +39 039 69599 1

Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
phone +39 039 62921

Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.