Servizio assistenza Sensori Industriali
Telefono: +39 039 69599 1
Fax.: +39 039 69599 30
Servizio assistenza Protezione contro le esplosioni
Telefono ++39 039 62921
Fax ++39 039 6292 390
6000 Series Vent EPV-6000-**
- Maximum enclosure size 450 ft3 (12.7 m3)
- Pressure relief vent with flow and pressure monitoring at the exhaust
- Universal mounting in any orientation
- 6000 Control Unit supports 2 vents
- Different vents for different applications
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Scarica il Datasheet completo in formato PDF:
Estratto del Datasheet: Dati tecnici del EPV-6000-**
| Descrizione prodotto |
|---|
| 6000 series purge and pressurization system vent |
| General specifications | ||
|---|---|---|
| Series | 6000 Series | |
| System | Type X Purge ; Ex pxb Purge | |
| Number of volume exchanges | 4 to 19 | |
| Hazardous environment | gas, dust, gas and dust | |
| Electrical specifications | ||
| Connection | ||
| Power | Intrinsically Safe back to 6000 control unit | |
| Signal | BUS back to 6000 control unit | |
| Connection | M12 connector, 4-pin | |
| Indicators/settings | ||
| LED indication | power: green vent number: yellow, on for second vent |
|
| Pneumatic parameters | ||
| Protective gas supply | instrument grade air or inert gas | |
| Safe pressure | Gas: 0.25" wc (6.4 mm wc) (0.625 mbar) (62 Pa) Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) (162 Pa) Gas and Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) ( 162 Pa) |
|
| Enclosure pressure | 0 ... 9.9" wc (25 mbar) (250 mm wc) | |
| Max. enclosure pressure | 25" wc (62 mbar) (625 mm wc) | |
| Purge flow rate | Maximum flow rate measurement for enclosure size (enclosure volume:flow rate): < 20 ft3 (0.57 m3): 5, 12 SCFM (141, 340 l/min), or dynamic 20 ... 30 ft3 (0.57 ... 0.85 m3): 5, 12, 20 SCFM (141, 340, 565 l/min), or dynamic > 30 ft3 (0.85 m3): 5, 12, 20, 30 SCFM (141, 340, 565, 850 l/min), or dynamic |
|
| Purge flow and enclosure pressure rate | With EPV-6000-xx-01, EPV-6000-xx-02 141 l/min @ 3.7 mbar, (5 SCFM @ 1.5" wc) 340 l/min @ 5.0 mbar, (12 SCFM @ 2.0" wc) 565 l/min @ 6.7 mbar, (20 SCFM @ 2.7" wc) 850 l/min @ 10.2 mbar, (30 SCFM @ 4.1" wc) With EPV-6000-xx-03, EPV-6000-xx-04 141 l/min @ 5.2 mbar, (5 SCFM @ 2.1" wc) 340 l/min @ 6.5 mbar, (12 SCFM @ 2.6" wc) 565 l/min @ 10.2 mbar, (20 SCFM @ 4.1" wc) 850 l/min @ 13.2 mbar, (30 SCFM @ 5.3" wc) With EPV-6000-xx-05, 06 141.6 l/min @ 4.1 mbar, (5 SCFM @ 1.64" wc) 339.8 l/min @ 5.5 mbar, (12 SCFM @ 2.20" wc) 566.3 l/min @ 14.9 mbar, (20 SCFM @ 6.00" wc) |
|
| Flow rate for leakage compensation | Depends on enclosure seal. With EPV-6000-xx-01, EPV-6000-xx-02 0.35 SCFM @ 0.25" wc (10.0 l/min @ 0.63 mbar) 1.0 SCFM @ 0.75" wc (28.0 l/min @ 1.9 mbar) With EPV-6000-xx-03, EPV-6000-xx-03 0.22 SCFM @ 0.25" wc (6.2 l/min @ 0.63 mbar) 0.58 SCFM @ 0.75" wc (16.4 l/min @ 1.9 mbar) With EPV-6000-xx-05, EPV-6000-xx-06 0.15 SCFM @ 0.25" wc (4.2 l/min @ 0.63 mbar) 0.35 SCFM @ 0.75" wc (10.0 l/min @ 1.9 mbar) |
|
| Breaking pressure | EPV-6000-xx-01, EPV-6000-xx-02: 0.8" wc (2.0 mbar) EPV-6000-xx-03, EPV-6000-xx-04: 1.3" to 1.4" wc (3.2 to 3.5 mbar) EPV-6000-xx-05, EPV-6000-xx-06: 1.4" to 1.5" wc (3.5 to 3.8 mbar) |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 EN 61000-6-2:2005 |
|
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN IEC 63000:2018 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 80 °C (-22 ... 176 °F) | |
| Relative humidity | 5 ... 95 %, noncondensing | |
| Vibration resistance | 5 ... 100 Hz , 1 g, 12 m/s2, all axes | |
| Impact resistance | 30 g, 11 ms, all axes | |
| Mechanical specifications | ||
| Material | EPV-6000-AA-.... Cap: marine grade 5052 anodized aluminum, marine grade 6061T6 anodized aluminum EPV-6000-SS-.... Cap: 316L (UNS S31603) stainless steel; Body: marine grade 6061T6 anodized aluminum |
|
| Spark arrestor | 304 (UNS S30400) stainless steel | |
| Installation | - any orientation to enclosure - not gravity dependent - internal and external mounting possible |
|
| Mass | approx. 1.4 kg (3.1 lb) | |
| Dimensions | 127.5 x 146 x 82.5 mm (5.05 x 5.75 x 3.25 inch) | |
| Height | 146 mm | |
| Width | 127.5 mm | |
| Depth | 82.5 mm | |
| Mounting | 1 1/2" NPT knockout (50.8 mm (2") hole) with sealed nut |
|
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | DEMKO 15 ATEX 1622X | |
| Marking | II 2 G Ex ib [pxb Gb] IIC T4 Gb II 2 D Ex ib [pxb Db] IIIC T135 °C Db -20 °C ≤ Ta ≤ 60 °C |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018 , EN 60079-2:2014 , EN 60079-11:2012 | |
| International approvals | ||
| UL approval | cULus Class I, Division 1, Groups A, B, C, D IP66/Type 4X Class I, Zone 1, Groups IIC, T4 Class II, Division 1, Groups E, F, G Class II, Zone 21, Group IIIC T135 °C -20 °C ≤ TA ≤ 60 °C Ex i intrinsically safe |
|
| IECEx approval | Ex ib [pxb Gb] IIC T4 Gb Ex ib [pxb Db] IIIC T135 °C Db -20 °C ≤ Ta ≤ 60 °C IECEx UL 15.0147X |
|
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180591 |
| ECLASS 12.0 | 27180591 |
| ECLASS 11.0 | 27180591 |
| ECLASS 10.0.1 | 27292190 |
| ECLASS 9.0 | 27292190 |
| ECLASS 8.0 | 27292190 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121303 |
Details: EPV-6000-**
Product Documentation: EPV-6000-**
| Safety and Security Documentation | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| Manuale di istruzioni | ITA | 170 KB | |
| Manuals | |||
| Manual | ENG | 10850 KB | |
Design / Simulation: EPV-6000-**
| CAD | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| 3D drawing for EPV-6000 and EPV-6500 Vent / 3-D-Modell für EPV-6000 und EPV-6500 Druckwächter | ALL | STP | 7814 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: EPV-6000-**
| Certificates | Certificato Numero | Lingua | File tipo | Dimensioni |
|---|---|---|---|---|
| ATEX Certificate | DEMKO 15 ATEX 1622X Rev. 1 | ALL | 256 KB | |
| China SITIIAS CCC Ex Certificate | 2020322304002499 (Katy, TX USA) | ALL | 1041 KB | |
| IECEx Certificate of Conformity | IECEx UL 15.0147X | ALL | LINK | --- |
| UK-Type Examination Certificate | UL21UKEX2016X | ALL | 231 KB | |
| UL Hazardous Location | E184741 (RFPW, RFPW7 , RFPZ7) | ALL | 741 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B067C | ALL | 145 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0G1A | ALL | 157 KB | |
Prodotti associati : EPV-6000-**
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
Scopri il modo più intelligente per garantire la protezione delle zone pericolose e configurare il tuo sistema di purge e pressurizzazione!
La nostra app interattiva consente la simulazione passo-passo della programmazione di un sistema di purge e pressurizzazione. Scarica ora l'app gratuita per dispositivi iOS o Android…
Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
+39 039 69599 1
Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
+39 039 62921
© 2024 Tutti i diritti riservati.
Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.