Servizio assistenza Sensori Industriali
Telefono: +39 039 69599 1
Fax.: +39 039 69599 30
Servizio assistenza Protezione contro le esplosioni
Telefono ++39 039 62921
Fax ++39 039 6292 390

Terminal resistor V15S-TR-CAN/DN-120R

V15S-TR-CAN/DN-120R
  • Suitable for DeviceNet and CANopen
  • Specific design protects against loosening and inaccurate installation
  • Pins 4 and 5 bridged

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:


Estratto del Datasheet: Dati tecnici del  V15S-TR-CAN/DN-120R

Descrizione prodotto
Terminal resistor M12 male straight A-coded 5-pin, for DeviceNet, CANopen
General specifications
Connector 1
Connectionplug
Construction typeM12
Stylestraight
Lockingscrew connection
Number of pins5
CodingA-coded
Customizationpin 4 and 5 bridged , resistance 120 Ohm
Electrical specifications
Operating voltagemax. 24 V DC
Operating currentmax. 4 A per contact
Conformity
Degree of protectionEN 60529
Fieldbus standardCANopen , DeviceNet
Plug connectionconnector M12 x 1 : IEC 61076-2-101
Ambient conditions
Ambient temperature-40 ... 90 °C (-40 ... 194 °F)
Pollution degree3
Mechanical specifications
Plug connector
Tightening torque0.6 Nm
Loosening protectionavailable
Tool installationstraight knurling and hexagon nut SW = 14 mm
Mating cyclesmin. 100
Degree of protectionIP68 / IP69
Mass8 g
Material
Plug connector
Screw connectionZinc diecast, nickel-plated
BodyTPU, black
Contact surfacegold plated (Au)
FlammabilityV-2

Classifications

SystemClasscode
ECLASS 13.027260190
ECLASS 12.019070403
ECLASS 11.019070403
ECLASS 10.0.119070403
ECLASS 9.027279090
ECLASS 8.027279290
ECLASS 5.127279201
ETIM 9.0EC003015
ETIM 8.0EC003015
ETIM 7.0EC003015
ETIM 6.0EC003015
ETIM 5.0EC002585
UNSPSC 12.131251501

Details: V15S-TR-CAN/DN-120R

Prodotti associati : V15S-TR-CAN/DN-120R

Accessory of

E1-Type approval, Measuring range 0 ... 360°, High shock resistance, Extended temperature range
-40 ... +85 °C, CANopen interface, Increased noise immunity 100 V/mfa

E1-Type approval, Measuring range 0 ... 360°, High shock resistance, Extended temperature range
-40 ... +85 °C, CANopen interface, Increased noise immunity 100 V/mfa

Radar sensor for distance and velocity measuring up to 25 m sensing range, with M12 connector, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: CANopen, Connection type: Connector plug, Threading: M12 x 1fa
Radar sensor for distance and velocity measuring up to 25 m measuring range, CAN bus with SAE J1939 protocol, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: J1939, Connection type: cablefa
Radar sensor for distance and velocity measuring up to 25 m measuring range, CAN bus with SAE J1939 protocol, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: J1939, Connection type: fixed cable with plug, Connection assembly: Deutsch connector DT04-6P-CE02
Deutsch contact 1060-16-0622
Deutsch wedge W6Pfa
Radar sensor for distance and velocity measuring up to 25 m measuring range, CAN bus with SAE J1939 protocol, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: J1939, Connection type: fixed cable with plug, Connection assembly: AMP connector Superseal 282107-1
AMP contact Superseal 282109-1fa
Radar sensor for distance and velocity measuring up to 25 m measuring range, CAN bus with SAE J1939 protocol, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: J1939, Connection type: Connector plug, Threading: M12 x 1fa
Inertial measurement unit for inclination, acceleration and rotation rate measurement in 3-axis each, Dynamic inclination measurement despite external acceleration, Adjustable ranges for compensation of external accelerations, disturbances, Adjustable thresholds for detection of measured value overruns, Measurement of inclination, acceleration and rotation rate in 3 axis each, CAN bus with CANopenfa
Inertial measurement unit for inclination, acceleration and rotation rate measurement in 3-axis each, Dynamic inclination measurement despite external acceleration, Adjustable ranges for compensation of external accelerations, disturbances, Adjustable thresholds for detection of measured value overruns, Measurement of inclination, acceleration and rotation rate in 3 axis each, CAN bus with SAE J1939 protocolfa
E1-Type approval, High shock resistance, Extended temperature range
-40 ... +85 °C, Measuring range -15° ... +15°, CAN bus with SAE J1939 protocolfa
E1-Type approval, High shock resistance, Extended temperature range
-40 ... +85 °C, Measuring range -60° ... +60°, CAN bus with SAE J1939 protocolfa
E1-Type approval, High shock resistance, Extended temperature range
-40 ... +85 °C, CAN bus with SAE J1939 protocol, Measuring range -85° ... +85°fa
E1-Type approval, Measuring range 0 ... 360°, High shock resistance, Extended temperature range
-40 ... +85 °C, CAN bus with SAE J1939 protocolfa
E1-Type approval, High shock resistance, Extended temperature range
-40 ... +85 °C, CANopen interface, Measuring range -15° ... +15°, Increased noise immunity 100 V/mfa
E1-Type approval, Measuring range 0 ... 360°, High shock resistance, Extended temperature range
-40 ... +85 °C, CAN bus with SAE J1939 protocolfa
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: UL Recognized , General purpose , Class 2 power source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: fixed cable with plug, Housing: PA-GF35, Connection assembly: AMP connector Superseal 282107-1
AMP contact Superseal 282109-1fa
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: UL Recognized , General purpose , Class 2 power source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: fixed cable with plug, Housing: PA-GF35fa
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa
Multi-ray LED scanner for measuring the distance to an object, measuring method: PRT, measuring range: up to 8 m on white, 2x M12 plugs, Distance measurement using object, Two-dimensional measurement with no moving parts, Measurement using eye-safe LED technology, 88° scanning angle, CANopen interfacefa
Radar sensor for distance and velocity measuring up to 25 m sensing range, with AMP connector, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: CANopen, Connection type: fixed cable with plug, Connection assembly: AMP connector Superseal 282107-1
AMP contact Superseal 282109-1fa
Radar sensor for distance and velocity measuring up to 25 m sensing range, with 2m cable, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: CANopen, Connection type: cablefa
Radar sensor for distance and velocity measuring up to 25 m sensing range, with DEUTSCH connector, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: CANopen, Connection type: fixed cable with plug, Connection assembly: Deutsch connector DT04-6P-CE02
Deutsch contact 1060-16-0622
Deutsch wedge W6Pfa
Accessories
torque screwdriver (0.6 Nm)fa
plug-in cap M12fa
Marking rings for M12 connectors, various colorsfa
Visita l'hub RFID

Visita il nostro "hub RFID": questo speciale sito Web offre una conoscenza di base per la tecnologia RFID. Qui troverai le risposte nella sezione domande frequenti e informazioni sulle applicazioni RFID più diffuse …