Valve Coupler FD0-VC-EX4.FF
- For four intrinsically safe valves with position sensors
- Installation in Zone 1 and Zone 2
- Valves in Zone 0
- Connection to fieldbus acc. to FISCO or Entity
- For FOUNDATION Fieldbus H1
- PCS integration via device description and function blocks
- Monitors lead breakage and short circuits
- Valve monitoring and diagnostics integrated
- Conducts partial stroke testing
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del FD0-VC-EX4.FF
| General specifications | ||
|---|---|---|
| Design / Mounting | Outside installation | |
| Fieldbus connection | ||
| FOUNDATION Fieldbus | ||
| Connection | Connection +, - | |
| Rated voltage | 9 ... 32 V | |
| Rated current | max. 23 mA | |
| Baud rate | 31.25 kBit/s | |
| Protocol | IEC 61158-2 | |
| Terminal "S" | only for the connection of the cable screen (BUS) and/or the potential compensation | |
| Terminal "PA" | only for the connection of the cable screen (sensor interface) and/or grounding | |
| Grounding plate | only for the connection of the potential compensation | |
| Field circuit | ||
| Inputs | ||
| Connection | 8, for binary sensors: terminals 3, 4, 7, 8, 11, 12, 15, 16 | |
| Sensor supply voltage | 5 V | |
| Sensor supply current | 5 mA | |
| Time delay before availability | 2 ms | |
| Max. cycle time | max. 160 ms | |
| Outputs | ||
| Connection | terminals 1+, 2-; 5+, 6-; 9+, 10-; 13+, 14- | |
| Output voltage | 6.4 ... 7.9 V | |
| Output rated operating current | 1.5 mA | |
| Holding current | 1 mA | |
| Galvanic isolation | ||
| Foundation Fieldbus/Field circuit | safe galvanic isolation acc. to EN 50020, voltage peak value 60 V | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| Standard conformity | ||
| Galvanic isolation | EN 60079-11 | |
| Electromagnetic compatibility | NE 21:2006 | |
| Degree of protection | IEC/EN 60529 | |
| Fieldbus standard | EN 50170/2 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 | |
| Mechanical specifications | ||
| Core cross-section | Bus cable: ∅ 5 mm ... 10 mm cable sensors/valve: ∅ 4 mm ... 8 mm |
|
| Housing | 187 mm x 129 mm x 46 mm | |
| Degree of protection | IP65 | |
| Installation position | Cable glands downwards | |
| Mass | approx. 290 g | |
| Mounting | wall mounting | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | PTB 98 ATEX 2210 | |
| Marking |  II 2G (1) Ex ia [ia Ga] IIC T4 Gb , II (1D) [Ex ia Da] IIIC , II 3G Ex ic IIC T4 Gc , II (3D) [Ex ic Dc] IIIC |
|
| Field-side | ||
| Voltage | 9 V | |
| Current | 44 mA | |
| Power | 99 mW | |
| FOUNDATION Fieldbus | ||
| Voltage | 24 V | |
| Current | 380 mA | |
| Power | 5.32 W | |
| Rated voltage | 9 ... 32 V | |
| Rated current | 23 mA | |
| FDE (Fault Disconnect Equipment) | 6.7 mA | |
| Terminal "S" | only for the connection of the cable screen (BUS) and/or the potential compensation | |
| Terminal "PA" | only for the connection of the cable screen (sensor interface) and/or grounding | |
| Grounding plate | only for the connection of the potential compensation | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 | |
| International approvals | ||
| IECEx approval | IECEx TUN 04.0002 | |
| Approved for | Ex ia [ia Ga] IIC T4 Gb , [Ex ia Da] IIIC , Ex ic IIC T4 Gc , [Ex ic Dc] IIIC |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242610 |
| ECLASS 12.0 | 27242610 |
| ECLASS 11.0 | 27242610 |
| ECLASS 10.0.1 | 27242610 |
| ECLASS 9.0 | 27242610 |
| ECLASS 8.0 | 27242610 |
| ECLASS 5.1 | 27242610 |
| ETIM 9.0 | EC001601 |
| ETIM 8.0 | EC001601 |
| ETIM 7.0 | EC001601 |
| ETIM 6.0 | EC001601 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121008 |
Details: FD0-VC-EX4.FF
Informative Literature: FD0-VC-EX4.FF
| Literature | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron | ENG | 361 KB | |
| Application Report - Digital Communication in Steel-Plate Manufacturing | ENG | 470 KB |
Product Documentation: FD0-VC-EX4.FF
| System Descriptions | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| Planning and integration: Compatibility list of sensors and pilot valves | ENG | 50 KB | |
| Manuals | |||
| Manual FD0-VC-Ex4.FF | ENG | 1054 KB | |
Approvals: FD0-VC-EX4.FF
| Certificates | Número de Certificado | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|---|
| Europe PTB II 2 G (1) II (1D) II (3D) II 3 G ATEX | PTB 98 ATEX 2210 | ALL | 1378 KB | |
| TUV Nord IECEx Certificate of Conformity | IECEx TUN 04.0002 | ALL | LINK | --- |
| Worldwide Fieldbus Foundation | IT035200 | ALL | 257 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-0812B | ALL | 88 KB | |
Software: FD0-VC-EX4.FF
| Device Description Files/Drivers | Liberar Info | Tipo de archivo | Tamaño |
|---|---|---|---|
| DD/CFF files, Device Revision 1 / DD/CFF-Dateien, Device Revision 1 | 0102/010201 | ZIP | 47 KB |
| DD/CFF files, Device Revision 2, DD Revision 2 / DD/CFF-Dateien, Device Revision 2, DD Revision 2 | 0202/020103 | ZIP | 57 KB |
Ethernet-APL permite una comunicación continua en todos los niveles jerárquicos. Obtenga más información sobre esta tecnología pionera…
Servicio de información RSS para actualizaciones de PANOS
Manténgase informado cuando se publique una nueva actualización de software de PANOS, el sistema operativo para conmutadores Ethernet-APL: Con nuestro canal RSS recibirá una notificación por correo electrónico en su bandeja de entrada inmediatamente después de que se haya publicado una nueva versión.
Desde las decisiones a la planificación, instalación y puesta en marcha, hasta el funcionamiento y mantenimiento: descubra cómo sacar el máximo partido de su infraestructura de bus de campo…
Pepperl+Fuchs, S.A.
Txori-Erri Etorbidea, 46
Edificio Esser
48150 Sondika (Vizcaya)
España
sov@es.pepperl-fuchs.com
+34 94 4535 020
Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.