Línea de servicio de Sensores Industriales
Teléfono: +34 94 453 50 20
Fax: +34 94 453 51 80
Atención al cliente para protección contra explosiones
Teléfono: +34 94 453 50 20
Fax: +34 94 453 51 80
Wireless Access Point (Ex d) EJB10A.I.CP-Y*
- Copper-free aluminum enclosure
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Suitable for operation in Class I, II Division 1
- Ex d and Ex tb certified
- Gas group IIB+H2
- Use of industrial Wireless Access Points in hazardous areas
- External antennas for best possible signal dispersion
- Customizable configuration of WI-FI and network devices and cable entries as per specification
- Degree of protection IP66 or IP66 / IP67, NEMA Type 4X
- Image and drawing are generic for this device type and may deviate from the specific variant
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del EJB10A.I.CP-Y*
| Descripción del producto |
|---|
| Wireless Access Point in copper-free aluminum enclosure for use in explosion-hazardous areas |
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 1500 V DC / 1000 V AC max. for ATEX / IECEx 600 V AC / DC max. for North American approvals |
|
| Operating current | 1600 A max. | |
| Mechanical specifications | ||
| Thread type | metric ISO pitch 1.5 mm or NPT ANSI ASME B1.20.1 | |
| Enclosure cover | detachable , optional hinges | |
| Cover fixing | stainless steel socket cap head screws | |
| Screws | see datasheets of relevant enclosures | |
| Material of screws | stainless steel | |
| Yield stress | min. 450 N/mm2 for ATEX / IECEx , 100,000 PSI for North American approvals | |
| Cover seal | none, O-ring for IP66/67 | |
| Flamepath grease | Greasil MS4 or NEVER SEEZ Marine Grade | |
| Degree of protection | IP66 (IP66/IP67 with O-ring) , NEMA Type 4, 4X, 7, 9 | |
| Material | ||
| Enclosure | aluminum alloy | |
| Glass | thermo-resistant tempered glass | |
| Finish | epoxy coated RAL 7005 (grey) | |
| O-Ring | silicone | |
| Mass | 25.1 kg | |
| Dimensions | 468 mm x 358 mm x 215 mm values might differ slightly due to casting and manufacturing tolerances |
|
| Mounting | see datasheets of relevant enclosures | |
| Grounding | M6 external grounding points | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 50 °C (-40 ... 122 °F) depending on integrated components |
|
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | INERIS 14 ATEX 0022X | |
| Marking |  II 2 GD Ex db IIB+H2 T* Gb Ex tb IIIC T** °C Db T6/T85 °C T5/T100 °C T4/T135 °C T3/T200 °C depending on configuration, ambient temperature and built-in power loss |
|
| Maximum power dissipation | see datasheets of relevant enclosures maximum power dissipation at T4/+40 °C enclosure without window |
|
| International approvals | ||
| UL approval | ||
| Approved for | Class I, Division 1, Groups B, C, D Class II, Division 1, Groups E, F, G Type 4, 4X, 7, 9 |
|
| cULus | Empty enclosure E482035 , UL 50E , UL 1203 , CSA C22.2, No. 25, 30 | |
| cETLus | Control panels E5003368 | |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
| IECEx approval | IECEx INE 14.0029X | |
| Further approvals | available on request | |
| Conformity | ||
| Degree of protection | EN60529 and UL 50 / UL 50E | |
| CE marking | 0080 or 0102, see type label | |
| General information | ||
| Ordering information | This Wireless Access Point solution will be delivered completely configured and assembled ready for use. For configuration details please contact customer service. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
| Installed components | All major WI-FI Access Point vendors such as Aruba, Cisco, ect. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180502 |
| ECLASS 12.0 | 27180502 |
| ECLASS 11.0 | 27180502 |
| ECLASS 10.0.1 | 27180502 |
| ECLASS 9.0 | 27180502 |
| ECLASS 8.0 | 27180508 |
| ECLASS 5.1 | 27180502 |
| ETIM 9.0 | EC002503 |
| ETIM 8.0 | EC002503 |
| ETIM 7.0 | EC002503 |
| ETIM 6.0 | EC002503 |
| ETIM 5.0 | EC002503 |
| UNSPSC 12.1 | 39121314 |
Details: EJB10A.I.CP-Y*
Product Documentation: EJB10A.I.CP-Y*
| Brief Instructions | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| Instruction Manual EJB | ENG | 256 KB |
Approvals: EJB10A.I.CP-Y*
| Certificates | Número de Certificado | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|---|
| Europe INERIS ATEX | INERIS 14 ATEX 0022X | ALL | 543 KB | |
| INERIS IECEx Certificate of Conformity | IECEx INE 14.0029X | ALL | LINK | --- |
| UL Hazardous Location | E482035 (FTRV) | ALL | 400 KB |
Pepperl+Fuchs, S.A.
Txori-Erri Etorbidea, 46
Edificio Esser
48150 Sondika (Vizcaya)
España
sov@es.pepperl-fuchs.com
+34 94 4535 020
© 2024 Todos los derechos reservados
Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.