Retroreflective sensor ML100-55/98/103 SET

Miniature design
Clearly visible function indicators
Not sensitive to ambient light
Very bright, highly visible light spot
Full metal thread mounting
Clearly visible LEDs for Power ON, switching state and weak signal indication
Supplied with reflector

Technical Data
Design / Simulation
Approvals
Prodotti associati
Chiedi ad un esperto

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:

Estratto del Datasheet: Dati tecnici del ML100-55/98/103 SET

Descrizione prodotto
Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, sensitivity adjuster, light/dark on, DC version, PNP output, M8 plug

General specifications
Effective detection range		0 ... 5 m
Reflector distance		0.02 ... 5 m
Threshold detection range		7 m
Reference target		H50 reflector
Light source		LED
Light type		modulated visible red light
Polarization filter		yes
Diameter of the light spot		approx. 500 mm at a distance of 7 m
Opening angle		approx. 4 °
Optical face		frontal
Ambient light limit		EN 60947-5-2:2007+A1:2012
Functional safety related parameters
MTTF_d		860 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: power on
Function indicator		LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted
Control elements		sensitivity adjustment
Control elements		Light-on/dark-on changeover switch
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load supply current		< 20 mA
Output
Switching type		The switching type of the sensor is adjustable. The default setting is: light-on
Signal output		1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Voltage drop		≤ 1.5 V DC
Switching frequency		1000 Hz
Response time		0.5 ms
Conformity
Product standard		EN 60947-5-2
Approvals and certificates
UL approval		cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-30 ... 60 °C (-22 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP67
Connection		M8 x 1 connector, 3-pin
Material
	Housing	PC (Polycarbonate)
	Optical face	PMMA
Mass		approx. 10 g
Tightening torque, fastening screws		0.6 Nm
Dimensions
	Height	31 mm
	Width	11 mm
	Depth	20 mm
Accessories
Accessories provided		Reflector REF-H50

Classifications

System	Classcode
ECLASS 13.0	27270902
ECLASS 12.0	27270902
ECLASS 11.0	27270902
ECLASS 10.0.1	27270902
ECLASS 9.0	27270902
ECLASS 8.0	27270902
ECLASS 5.1	27270902
ETIM 9.0	EC002717
ETIM 8.0	EC002717
ETIM 7.0	EC002717
ETIM 6.0	EC002717
ETIM 5.0	EC002717
UNSPSC 12.1	39121528

Details: ML100-55/98/103 SET

Design / Simulation: ML100-55/98/103 SET

CAD	Lingua	File tipo	Dimensioni
CAD 3-D / CAD 3-D	ALL	STP	1261 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: ML100-55/98/103 SET

Certificates	Certificato Numero	Lingua	File tipo	Dimensioni
USA UL E87056	UL-US-2015966-0 / UL-CA-2012696-0	ALL	PDF	550 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)	DOC-0435F	ALL	PDF	311 KB
UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F)	DOC-5267	ALL	PDF	230 KB

Prodotti associati : ML100-55/98/103 SET

Kit component

	ML100-55/98/103 Retroreflective sensor
	Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, sensitivity adjuster, light/dark on, DC version, PNP output, M8 plug, Miniature design, Clearly visible function indicators, Not sensitive to ambient light, Very bright, highly visible light spot, Full metal thread mountingfa

	REF-H50 Reflector
	Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa

Accessories

	V3-GM-2M-PUR Female cordset
	Female cordset single-ended M8 straight A-coded, 3-pin, PUR cable greyfa

	V3-WM-2M-PUR Female cordset
	Female cordset single-ended M8 angled A-coded, 3-pin, PUR cable greyfa

	REF-H85-2 Reflector
	Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa

	OFR-100/100 Reflective tape
	Reflective tape 100 mm x 100 mmfa

Informazione generale sul prodotto

Una rinnovata versatilità - Serie R10x e R20x

Per la prima volta, una vasta gamma di sensori fotoelettrici e tecnologie innovative si incontrano in un design di custodie standardizzato. Gli utenti beneficiano di un concetto operativo uniforme in tutta la gamma. Scopri le serie R100, R101, R103, R200 e R201...

Serie ML100: il risolutore di problemi per applicazioni speciali

Che si tratti di vetro, wafer solari o schede a circuito stampato: I sensori fotoelettrici della serie ML100 sono realizzati su misura per soddisfare i requisiti di varie attività di rilevamento complesse. Maggiori informazioni sulla gamma...

Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
phone +39 039 69599 1

Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
phone +39 039 62921

Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.