Retroreflective sensor VL18-54-MS/40a/118/128

Array control panel with highly visible LED display
Flashing power on LED in case of short-circuit
Optical face lateral, flush to the housing
Multiple device installation possible, no mutual interference (no cross-talk)
Not sensitive to ambient light, even with switched energy saving lamps
Protection class II

Technical Data
Product Documentation
Design / Simulation
Approvals
Prodotti associati
Chiedi ad un esperto

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:

Estratto del Datasheet: Dati tecnici del VL18-54-MS/40a/118/128

Descrizione prodotto
Retroreflective sensor with polarization filter

General specifications
Effective detection range		0 ... 3.5 m
Threshold detection range		4 m
Reference target		H50 reflector
Light source		LED
Light type		modulated visible red light , 632 nm
Polarization filter		yes
Diameter of the light spot		160 mm at a distance of 3500 mm
Opening angle		3 °
Optical face		lateral
Ambient light limit		30000 Lux ; according to EN 60947-5-2:2007
Hysteresis		< 15 %
Functional safety related parameters
MTTF_d		700 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green, flashes in case of short-circuit
Function indicator		LED yellow, light with free light beam , flashes when falling short of the operating reserve , OFF when light beam is interrupted
Control elements		Sensitivity adjuster, light/dark switch
Electrical specifications
Operating voltage		10 ... 30 V DC , class 2
No-load supply current		< 25 mA
Protection class		II , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1
Output
Switching type		light/dark on, switchable
Signal output		Push-pull (4 in 1) output short-circuit protected overvoltage protected
Switching voltage		30 V DC
Switching current		max. 200 mA
Voltage drop		≤ 2.5 V DC
Switching frequency		500 Hz
Response time		1 ms
Conformity
Product standard		EN 60947-5-2
Approvals and certificates
EAC conformity		TR CU 020/2011
UL approval		cULus Listed, Type 1 enclosure
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-30 ... 70 °C (-22 ... 158 °F)
Relative humidity		90 % , noncondensing
Mechanical specifications
Degree of protection		IP67
Connection		4-pin, M12 x 1 connector
Material
	Housing	brass, nickel-plated
	Optical face	PMMA
Mass		60 g
Dimensions
	Length	65 mm
	Diameter	18 mm

Classifications

System	Classcode
ECLASS 13.0	27270902
ECLASS 12.0	27270902
ECLASS 11.0	27270902
ECLASS 10.0.1	27270902
ECLASS 9.0	27270902
ECLASS 8.0	27270902
ECLASS 5.1	27270902
ETIM 9.0	EC002717
ETIM 8.0	EC002717
ETIM 7.0	EC002717
ETIM 6.0	EC002717
ETIM 5.0	EC002717
UNSPSC 12.1	39121528

Details: VL18-54-MS/40a/118/128

Product Documentation: VL18-54-MS/40a/118/128

Brief Instructions	Lingua	File tipo	Dimensioni
Instruction leaflet / Beipackzettel	ALL	PDF	487 KB

Design / Simulation: VL18-54-MS/40a/118/128

CAD	Lingua	File tipo	Dimensioni
CAD 3-D / CAD 3-D	ALL	STP	2597 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: VL18-54-MS/40a/118/128

Certificates	Certificato Numero	Lingua	File tipo	Dimensioni
Canada USA UL Ordinary Location	UL-US-L87056-11-01805002-1 / UL-CA-L87056-31-01805002-1	ALL	PDF	502 KB
Canada USA UL Ordinary Location	E87056	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0537C	ALL	PDF	309 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5342	ALL	PDF	229 KB

Prodotti associati : VL18-54-MS/40a/118/128

Accessories

	BF 18 Mounting flange
	Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa

	BF 5-30 Mounting flange
	Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa

	CPZ18B03 Mounting aid
	Mounting Bracket with swivel nutfa

	BF 18-F Mounting flange
	Plastic mounting adapter, 18 mmfa

	REF-H85-2 Reflector
	Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa

	REF-H50 Reflector
	Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa

Informazione generale sul prodotto

Una rinnovata versatilità - Serie R10x e R20x

Per la prima volta, una vasta gamma di sensori fotoelettrici e tecnologie innovative si incontrano in un design di custodie standardizzato. Gli utenti beneficiano di un concetto operativo uniforme in tutta la gamma. Scopri le serie R100, R101, R103, R200 e R201...

Serie ML100: il risolutore di problemi per applicazioni speciali

Che si tratti di vetro, wafer solari o schede a circuito stampato: I sensori fotoelettrici della serie ML100 sono realizzati su misura per soddisfare i requisiti di varie attività di rilevamento complesse. Maggiori informazioni sulla gamma...

Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
phone +39 039 69599 1

Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
phone +39 039 62921

Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.