WCS interface module WCS-PG410
- Up to 4 read heads can be connected
- DIN rail mounting
- Integrated switch
- PROFIBUS interface
- Measuring length max. 629 m
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Scarica il Datasheet completo in formato PDF:
Estratto del Datasheet: Dati tecnici del WCS-PG410
| Descrizione prodotto |
|---|
| WCS Profibus interface module |
| General specifications | ||
|---|---|---|
| Installation | DIN rail mounting | |
| Functional safety related parameters | ||
| MTTFd | 180 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Power consumption | ≤ 3.6 W (without read heads) | |
| Interface 1 | ||
| Connection of | control system | |
| Interface type | PROFIBUS DP V1 | |
| Transfer rate | max. 12 MBit/s , Automatic baud rate detection | |
| Data output format | binary code | |
| Bus termination resistor | switchable | |
| Interface 2 | ||
| Connection of | WCS read heads | |
| Connectable read heads | WCS...-LS121 , WCS...-LS221 , WCS3B-LS1/2**ES with option ES (Extended Protocol up to 628 m) | |
| Interface type | RS-485 | |
| Transmission method | half duplex | |
| Transfer rate | 62.5 kBit/s | |
| RS485 termination resistor | switchable | |
| Refresh cycle of read head | 1 ms / 10 ms (with extended WCS read head) | |
| Standard conformity | ||
| Emitted interference | EN 55011, cl. A: 2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) , no moisture condensation | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | ≤ 80 % | |
| Mechanical specifications | ||
| Connection type | Interface 1: 9-pin Sub-D connector Interface 2: terminal connection ≤ 2.5 mm2 Interface 3: Terminal connection, 2-pin |
|
| Degree of protection | IP20 | |
| Material | plastic | |
| Installation position | any position | |
| Mass | approx. 130 g | |
| Dimensions | ||
| Height | 111 mm | |
| Width | 23 mm | |
| Depth | 117 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270991 |
| ECLASS 12.0 | 27270991 |
| ECLASS 11.0 | 27270791 |
| ECLASS 10.0.1 | 27270791 |
| ECLASS 9.0 | 27270791 |
| ECLASS 8.0 | 27270791 |
| ECLASS 5.1 | 27270791 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 41111945 |
Details: WCS-PG410
Product Documentation: WCS-PG410
| Manuals | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| Manual Interface Modul WCS-PG410 | ENG | 4022 KB | |
| Manual WCS Electrical | ENG | 11790 KB | |
| Manual WCS Mechanical | ENG | 12338 KB |
Approvals: WCS-PG410
| Declaration of Conformity | Certificato Numero | Lingua | File tipo | Dimensioni |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2710C | ALL | 34 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6638 | ALL | 132 KB |
Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
+39 039 69599 1
Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
+39 039 62921
Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.