IO-Link Motor Roller Module ICA-8IO-4M4-G20-IO-P14

Configuration and control via IO-Link
Connections for 24 V or 48 V DC roller motors
Inputs for 2- and 3-wire sensors
Electronic PNP outputs
Function indicator for motors, inputs and outputs
Mounting directly in the support profile

Technical Data
Product Documentation
Design / Simulation
Approvals
Software
Prodotti associati
Chiedi ad un esperto

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:

Estratto del Datasheet: Dati tecnici del ICA-8IO-4M4-G20-IO-P14

Descrizione prodotto
G20 MDR module with IO-Link for 8 digital inputs/outputs and 4 connections for MDRs (24 V / 48 V)

General specifications
UL File Number		E223772 "For use in NFPA 79 Applications only"
MTBF		90 a
Compatible roller motors		Interroll EC310, Interroll EC5000 24V/48V AI (20W / 35W / 50W), Rulmeca BL3, Itoh Denki PM500XK, Itoh Denki PM500XC , PULSEROLLER Senergy-IDC
Indicators/operating means
LED yellow/red		IO1 ... IO8: IN, OUT, IO-Link status M1 ... M4: motor status
Electrical specifications
Auxiliary voltage		18 ... 56 V DC PELV Max. 10 A Current limitation of the supply max. 30 A For UL: Z-type miniature circuit breaker in accordance with UL 1077, max. 20 A, required
Operating voltage		18 ... 30 V DC, PELV Current limitation of the supply max. 4 A
No-load supply current		≤ 25 mA
Operating current		max. 2.5 A
Interface
Interface type		IO-Link
IO-Link revision		1.1
Device profile		Identification and Diagnosis - I&D Firmware update
Process data		8 byte inputs (STD/EXT) 6 byte outputs (STD) 18 byte outputs (EXT)
Vendor ID		1 (0x0001)
Device ID		984068 (0x0F0404) (STD) - default 984067 (0x0F0403) (EXT)
Data transfer rate		COM3 (230.4 kbits/s)
Min. cycle time		1.2 ms (STD) 2 ms (EXT)
SIO mode support		no
Compatible master port type		Class A
Input
Number/Type		8 Inputs for 3-wire sensors (PNP), DC (IO1 ... IO8)
Supply		from IO-Link
Current loading capacity		200 mA per connection IO1/2 ... IO7/8 , overload and short-circuit protected
Input current		≤ 5 mA (limited internally)
Switching point		Type 3 according to IEC 61131-2
Output 1
Number/Type		8 electronic outputs, PNP (IO1 … IO8), overload proof and short-circuit proof
Supply		from IO-Link
Current		200 mA per output
Voltage		≥ (U_e - 1.5 V)
Output 2
Number/Type		4 outputs for DC roller motors (MOT1 ... MOT4)
Supply		via U_PWR
Current loading capacity		3.5 A (continuous), 5 A (< 2 s), max. 7.5 A (< 0.3 s) per motor Total current (continuous) max. 10 A per device (T_B ≤ 50 °C) max. 6 A per device (T_B ≤ 60 °C)
Overload protection		Fuse 4 A, I²t = 122.5 A²s per motor
Signal level		Speed: U_S = 0.3 … 10 V in no-load operation R_i = 5.6 kΩ, R_LOAD ≥ 35 kΩ Direction of rotation: Digital output PNP U_D low = high resistance U_D high ≥ 12 V R_i = 5.6 kΩ, R_LOAD ≥ 15 kΩ
Fault level		Motor fault: Digital input NPN 0 (no error) ≥ 125 µA 1 (error) ≤ 25 µA
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 EN 55011:2016
Standard conformity
Degree of protection		EN 60529:2000
Fieldbus standard		EN 61131-9:2013
Input		EN 61131-2:2007
Communication interface		IEC 61131-9 / IO-Link V1.1.3
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005, EN 61326-1:2006
Approvals and certificates
UL approval		O1 ... O8 (Output 1): Load specification DC General Use / DC Pilot Duty Degree of protection not tested by UL; tested by Pepperl+Fuchs SE
Ambient conditions
Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Storage temperature		-25 ... 70 °C (-13 ... 158 °F)
Relative humidity		85 % non-condensing
Climatic conditions		For indoor use only
Altitude		≤ 5000 m above MSL
Shock and impact resistance		30 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks
Vibration resistance		0.35 mm / 5 g 5 ... 500 Hz
Pollution degree		2
Mechanical specifications
Degree of protection		IP54 according to EN 60529
Connection		24 V/48 V power (PWR): Piercing technology, black or gray flat cable IO-Link: M12 round plug connector in accordance with EN 61076-2-101, LM type (4-pin, connector contacts, screw-locking, A-coded) Female connector: LF type or similar Inputs/outputs (IO), motors (MOT): M8 round plug connector in accordance with EN 61076-2-104 IO: LF type (4-pin, bushing contacts, screw-locking, A-coded) Female connector: LM type or similar MOT: NF type (5-pin, bushing contacts, snap-locking, B-coded) Female connector: NM type or similar
Mass		390 g
Dimensions
	Height	27.5 mm
	Width	131.5 mm
	Length	54 mm
Mounting		2 clips with ∅ 8 mm drill hole The module must be secured to a solid, continuous surface using the two lugs
Cable length		1 m (IO-Link) 1.5 m (IO1/2, IO7/8), 0.8 m (IO3/4, IO5/6) 1.0 m (MOT1, MOT4); 0.4 m (MOT2, MOT3) max. 10 m
Note		The flat cable routing is designed for 100 actuation cycles

Classifications

System	Classcode
ECLASS 13.0	27242602
ECLASS 12.0	27242602
ECLASS 11.0	27242602
ECLASS 10.0.1	27242602
ECLASS 9.0	27242602
ECLASS 8.0	27242602
ECLASS 5.1	27242602
ETIM 9.0	EC001597
ETIM 8.0	EC001597
ETIM 7.0	EC001597
ETIM 6.0	EC001597
ETIM 5.0	EC001597
UNSPSC 12.1	32151705

Details: ICA-8IO-4M4-G20-IO-P14

Product Documentation: ICA-8IO-4M4-G20-IO-P14

Brief Instructions	Lingua	File tipo	Dimensioni
Instruction leaflet / Beipackzettel	ALL	PDF	206 KB
Manuals
Manual	ENG	PDF	766 KB
Parameter Information
IODD for ICA-8IO-4M4-G20-IO-P14 (EXT)	ENG	PDF	512 KB
IODD for ICA-8IO-4M4-G20-IO-P14 (STD)	ENG	PDF	510 KB

Design / Simulation: ICA-8IO-4M4-G20-IO-P14

CAD	Lingua	File tipo	Dimensioni
CAD 3-D / CAD 3-D	ALL	STP	3418 KB

Approvals: ICA-8IO-4M4-G20-IO-P14

Certificates	Certificato Numero	Lingua	File tipo	Dimensioni
IO-Link Manufacturer Declaration	CERT-7376	ALL	PDF	173 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-7569_ITA	ITA	PDF	194 KB
UK Declaration of Conformity (P+F)	TDOC-7571_ENG	ENG	PDF	171 KB

Software: ICA-8IO-4M4-G20-IO-P14

Device Description Files/Drivers	informazioni sulla liberatoria	File tipo	Dimensioni
IODD for ICA-8IO-4M4-G20-IO-P14 (EXT) / IODD für ICA-8IO-4M4-G20-IO-P14 (EXT)	V1.00.000 / 2024-04-10	ZIP	223 KB
IODD for ICA-8IO-4M4-G20-IO-P14 (STD) / IODD für ICA-8IO-4M4-G20-IO-P14 (STD)	V1.00.000 / 2024-04-10	ZIP	222 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool	V1.00.006 / 2022-07-10	ZIP	96138 KB

Prodotti associati : ICA-8IO-4M4-G20-IO-P14

Accessories

	VAZ-G20-MH Mounting aid
	Mounting aidfa

	VAZ-G10-LIMITER Voltage limiter
	Voltage limiter G10fa

	V311-GR-BK1M-PUR-U-V311-GR Connection cable
	Cordset M8 socket snap-lock straight to M8 plug snap-lock straight B-coded, 5-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

	V311-GR-BK2M-PUR-U-V311-GR Connection cable
	Cordset M8 socket snap-lock straight to M8 plug snap-lock straight B-coded, 5-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

Informazione generale sul prodotto

NOVITÀ! Starter kit IIoT per una semplice visualizzazione e analisi dei dati dei sensori

Collegate al cloud i sensori utilizzati in fabbrica e iniziate la trasformazione digitale con i nuovi starter kit IIoT.

Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
phone +39 039 69599 1

Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
phone +39 039 62921

Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.