Stationary read device ODT-MAC401-ND-RD
- Up to 60 readings per second
- Movement speeds of up to 20 m/s
- Omni-directional reading
- Evaluation of up to 256 gray values with adaptive gray value threshold
- VGA output
- Simple focussing via laser pointers
- Integrated error image memory
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Scarica il Datasheet completo in formato PDF:
Estratto del Datasheet: Dati tecnici del ODT-MAC401-ND-RD
| Descrizione prodotto |
|---|
| Stationary high-speed read device for code speeds up to 20 m/s and 60 fps, Data Matrix ECC 200 Code, angled line of sight, VGA resolution, Ethernet, RS 232 |
| General specifications | ||
|---|---|---|
| Light type | Integrated LED lightning (red) | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 2 | |
| Wave length | 650 nm | |
| Beam divergence | < 1.5 mrad | |
| Maximum optical power output | 0.5 mW | |
| Symbologies | Data Matrix ECC 200 | |
| Read distance | 60 mm | |
| Depth of focus | ± 5 mm | |
| Reading field | 30 mm x 20 mm | |
| Modul size | min. 0.2 mm | |
| Evaluation frequency | max. 60 Hz | |
| Target velocity | triggered max. 20 m/s | |
| Data Matrix | ||
| Symbol size | rectangular up to 48 x 48 modules rectangular up to 16 x 48 modules |
|
| Data format | ASCII, C40, Text, X12, Edifact, Base 256 , all according to ISO 646 | |
| Data capacity | 348 numerical, 259 ASCII, 172 Byte | |
| Orientation | omnidirectional | |
| Nominal ratings | ||
| Camera | ||
| Type | CMOS , Global shutter | |
| Number of pixels | 752 x 480 pixels | |
| Gray scale | 256 | |
| Image recording | real-time , Program-controlled or triggered externally | |
| Indicators/operating means | ||
| LED indication | for good/poor reading | |
| Electrical specifications | ||
| Operating voltage | 24 V DC ± 15% , PELV | |
| No-load supply current | max. 250 mA | |
| Power consumption | 6 W | |
| Interface | ||
| Physical | RS 232 | |
| Protocol | ASCII | |
| Transfer rate | 9600 ... 115200 Bit/s | |
| Cable length | max. 30 m | |
| Interface 1 | ||
| Interface type | Ethernet | |
| Protocol | TCP/IP | |
| Transfer rate | 100 MBit/s | |
| Cable length | max. 30 m | |
| Input | ||
| Input voltage | to be applied externally 24 V ± 15% PELV | |
| Number/Type | 1 trigger input optional up to 4 inputs |
|
| Input current | approx. 5 mA at 24 V DC | |
| Cable length | max. 30 m | |
| Output | ||
| Number/Type | 2 electronic outputs, PNP , optically decoupled optional up to 4 outputs |
|
| Switching voltage | to be applied externally 24 V ± 15 % PELV | |
| Switching current | 100 mA each output | |
| Cable length | max. 30 m | |
| Output 1 | ||
| Output type | Video output, RGB (75 Ohm), 1 Vpp | |
| Resolution | VGA, 800 x 600 pixels | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 61326-1 , EN 61000-6-4 | |
| Standard conformity | ||
| Noise immunity | EN 61326-1 | |
| Emitted interference | EN 61000-6-4 | |
| Degree of protection | EN 60529 | |
| Laser class | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 45 °C (32 ... 113 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | Video: 7-pin socket Power supply/interfaces/inputs and outputs: Sub-D 15-pin UNC LAN : RJ-45 socket, 8-pin |
|
| Material | ||
| Housing | powder coated diecast zinc | |
| Mass | approx. 760 g | |
| Dimensions | ||
| Height | 60 mm | |
| Width | 60 mm | |
| Depth | 120 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280103 |
| ECLASS 12.0 | 27280103 |
| ECLASS 11.0 | 27280103 |
| ECLASS 10.0.1 | 27280103 |
| ECLASS 9.0 | 27280103 |
| ECLASS 8.0 | 27280103 |
| ECLASS 5.1 | 27280103 |
| ETIM 9.0 | EC002999 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| ETIM 5.0 | EC002999 |
| UNSPSC 12.1 | 43211701 |
Details: ODT-MAC401-ND-RD
Product Documentation: ODT-MAC401-ND-RD
| Brief Instructions | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| Brief Instructions - ODT-MAC4**-ND-RD | ENG | 1113 KB | |
| Brief Instructions - ODT-MAC40*-*-RD | ENG | 1022 KB | |
| Manuals | |||
| Manual ODT-MAC40*-*-RD | ENG | 4575 KB | |
Design / Simulation: ODT-MAC401-ND-RD
| CAD | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1325 KB |
Prodotti associati : ODT-MAC401-ND-RD
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Dai lettori di codici 2D ai palmari, fino agli scanner di codici a barre e alle soluzioni speciali: trova la soluzione ideale per le tue attività di identificazione ottica.
Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
+39 039 69599 1
Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
+39 039 62921
Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.