Thru-beam sensor (pair) OBE500-R3F-SE2-0,2M-V31
- Very flat design for direct mounting without mounting bracket
- Very bright, highly visible light spot
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Scarica il Datasheet completo in formato PDF:
Estratto del Datasheet: Dati tecnici del OBE500-R3F-SE2-0,2M-V31
| Descrizione prodotto |
|---|
| Thru-beam sensor, flat design, M3 mounting, 500 mm detection range, red light, dark on, PNP output, with 0.2 m fixed cable and M8 plug, 4-pin |
| System components | ||
|---|---|---|
| Emitter | OBE500-R3F-S-0,2M-V31 | |
| Receiver | OBE500-R3F-E2-0,2M-V31 | |
| General specifications | ||
| Effective detection range | 0 ... 500 mm |
|
| Threshold detection range | 700 mm |
|
| Light source | LED | |
| Light type | modulated visible red light , 630 nm | |
| LED risk group labelling | exempt group | |
| Angle deviation | approx. 2 ° | |
| Object size | typ. starts from 1.5 mm | |
| Diameter of the light spot | approx. 90 mm at a distance of 500 mm | |
| Opening angle | approx. 5 ° | |
| Optical face | frontal | |
| Ambient light limit | EN 60947-5-2 : 25000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 806 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) | |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| No-load supply current | Emitter: ≤ 11 mA Receiver: ≤ 8 mA |
|
| Protection class | III | |
| Input | ||
| Test input | Test of switching function at 0 V | |
| Output | ||
| Switching type | NO contact / dark-on | |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 50 mA , resistive load | |
| Voltage drop | ≤ 1.5 V DC | |
| Switching frequency | approx. 1 kHz | |
| Response time | 500 µs | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Approvals and certificates | ||
| UL approval | E87056 , cULus Recognized, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 200 mm fixed cable with 4-pin, M8x1 connector | |
| Material | ||
| Housing | PC (Polycarbonate) and Stainless steel | |
| Optical face | PMMA | |
| Cable | PUR | |
| Mass | approx. 10 g per sensor | |
| Tightening torque, fastening screws | 1 Nm | |
| Dimensions | ||
| Height | 25.5 mm | |
| Width | 16 mm | |
| Depth | 4.1 mm | |
| Cable length | 200 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: OBE500-R3F-SE2-0,2M-V31
Product Documentation: OBE500-R3F-SE2-0,2M-V31
| Brief Instructions | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 478 KB |
Design / Simulation: OBE500-R3F-SE2-0,2M-V31
| CAD | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1011 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: OBE500-R3F-SE2-0,2M-V31
| Certificates | Certificato Numero | Lingua | File tipo | Dimensioni |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-US-2141290-2 / UL-CA-2134655-2 | ALL | 550 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0700B | ALL | 305 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5344 | ALL | 298 KB | |
Prodotti associati : OBE500-R3F-SE2-0,2M-V31
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Per la prima volta, una vasta gamma di sensori fotoelettrici e tecnologie innovative si incontrano in un design di custodie standardizzato. Gli utenti beneficiano di un concetto operativo uniforme in tutta la gamma. Scopri le serie R100, R101, R103, R200 e R201...
Che si tratti di vetro, wafer solari o schede a circuito stampato: I sensori fotoelettrici della serie ML100 sono realizzati su misura per soddisfare i requisiti di varie attività di rilevamento complesse. Maggiori informazioni sulla gamma...
Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
+39 039 69599 1
Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
+39 039 62921
Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.