AS-Interface I/O module VBA-4E3A-G20-ZEL/M1L-P2

A/B node with extended addressing possibility for up to 62 nodes
Inputs for 3-wire sensors
Outputs for DC roller motors (drum motors)
Connection of motors and sensors via M8 connectors
Configurable start/stop ramps
Communication monitoring
Power supply of the inputs and outputs from the external auxiliary voltage
Function display for bus, external auxiliary voltage, in- and outputs
Cable piercing method with gold plated contact pins

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Prodotti associati
Chiedi ad un esperto

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:

Estratto del Datasheet: Dati tecnici del VBA-4E3A-G20-ZEL/M1L-P2

Descrizione prodotto
G20 motor control module for Interroll EC310, Interroll EC5000 24V AI, Rulmeca BL3, Itoh Denki PM500XK, Itoh Denki PM500XC, PULSEROLLER Senergy-IDC

General specifications
Node type		A/B node
AS-Interface specification		V3.0
Required gateway specification		≥ V2.1
Profile		S-7.A.E
	IO code	7
	ID code	A
	ID1 code	6
	ID2 code	E
UL File Number		E223772 "For use in NFPA 79 Applications only"
MTBF		98 a
Compatible roller motors		Interroll EC310, Interroll EC5000 24V AI (20W / 35W / 50W), Rulmeca BL3, Itoh Denki PM500XK, Itoh Denki PM500XC , PULSEROLLER Senergy-IDC
Indicators/operating means
LED FAULT		error display; LED red red: communication error or address is 0 red flashing: overload of sensor supply or external auxiliary voltage U_AUX missing
LED ERR		Motor fault: 2 LED yellow
LED PWR		AS-Interface voltage; green LED green: voltage OK green flashing: address 0 or sensor supply overload or external auxiliary voltage U_AUX missing
LED AUX		ext. auxiliary voltage U_AUX; dual LED green/red green: voltage OK red: reverse voltage
LED IN		switching state (input); 2 LED yellow
LED FUSE		Motor power supply; 2 green LEDs
LED DIR		Motor rotation direction; yellow LED
LED MOT		Motor active; 2 yellow LEDs
Electrical specifications
Auxiliary voltage (output)		18 ... 30 VDC PELV
Rated operating voltage		26.5 ... 31.6 V from AS-Interface
Rated operating current		≤ 35 mA
Input
Number/Type		2 Inputs for 3-wire sensors (PNP), DC
Supply		from external auxiliary voltage U_AUX
Current loading capacity		500 mA , overload and short-circuit protected
Input current		≤ 8 mA (limited internally)
Switching point		according to DIN EN 61131-2 0 (undamped) ≤ 0.5 mA 1 (damped) ≥ 2.0 mA
Signal delay		< 1 ms (input/AS-Interface)
Input filter		2 ms
Output
Number/Type		2 outputs for DC roller motors (MOT1, MOT2)
Supply		from external auxiliary voltage U_AUX
Current		3.5 A continuous current , 5 A (<2 s) , max. 7.5 A (<0,3 s) per motor
Overload protection		Fuse 5 A, I²t = 53.7 A²s per motor
Velocity signal		1.4 … 13 V at no-load R_i = 5.6 kΩ, R_LOAD ≥ 35 kΩ Control via parameter P2:0
Rotation direction signal		Off / ≥ (U_AUX - 1.0 V) at no-load R_i = 5.6 kΩ, R_LOAD ≥ 5 kΩ AS-Interface data bit D2 = 0: U_D = Off
Motor fault		Digital input NPN, U₀ = 3.3 V, R_i = 52 kΩ 0 (no error) ≥ 40 µA 1 (error) ≤ 30 µA
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 62026-2:2013
Standard conformity
Degree of protection		EN 60529:2000
Fieldbus standard		EN 62026-2:2013
Input		EN 61131-2:2007
Emitted interference		EN 61000-6-4:2007
AS-Interface		EN 62026-2:2013
Noise immunity		EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013
Ambient conditions
Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Storage temperature		-30 ... 85 °C (-22 ... 185 °F)
Mechanical specifications
Degree of protection		IP54 according to EN 60529
Connection		AS-Interface, AUX: Insulation piercing technology Yellow flat cable/black flat cable Inputs/outputs: M8 round plug connector in accordance with EN 61076-2-104 Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM004-Gx1-A or similar Outputs: NF005-SS1-B (5-pin, bushing contacts, snap lock, B-coded). Matching connector: NM005-Sx1-B or similar
Mass		220 g
Dimensions
	Height	27.5 mm
	Width	131.5 mm
	Length	54 mm
Mounting		2 clips with ∅ 8 mm drill hole
Cable length		1 m
Note		The flat cable routing is designed for 100 actuation cycles

Classifications

System	Classcode
ECLASS 13.0	27242604
ECLASS 12.0	27242604
ECLASS 11.0	27242604
ECLASS 10.0.1	27242604
ECLASS 9.0	27242604
ECLASS 8.0	27242604
ECLASS 5.1	27242604
ETIM 9.0	EC001599
ETIM 8.0	EC001599
ETIM 7.0	EC001599
ETIM 6.0	EC001599
ETIM 5.0	EC001599
UNSPSC 12.1	39121535

Details: VBA-4E3A-G20-ZEL/M1L-P2

Informative Literature: VBA-4E3A-G20-ZEL/M1L-P2

Literature	Lingua	File tipo	Dimensioni
Portfolio overview G20 modules / Portfolio-Übersicht G20-Module	ALL	PDF	121 KB

Product Documentation: VBA-4E3A-G20-ZEL/M1L-P2

Brief Instructions	Lingua	File tipo	Dimensioni
Instruction leaflet / Beipackzettel	ALL	PDF	225 KB
Manuals
Manual VBA-4E3A-G20-ZEL/M1L-P2 and VBA-4E3A-G20-ZEL/M1L-P6	ENG	PDF	944 KB

Design / Simulation: VBA-4E3A-G20-ZEL/M1L-P2

CAD	Lingua	File tipo	Dimensioni
CAD 3-D / CAD 3-D	ALL	STP	1692 KB

Approvals: VBA-4E3A-G20-ZEL/M1L-P2

Certificates	Certificato Numero	Lingua	File tipo	Dimensioni
US CA UL	CoC UL-US-L223772-13-82803102-1	ALL	PDF	175 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-4822C	ALL	PDF	109 KB

Software: VBA-4E3A-G20-ZEL/M1L-P2

Device Description Files/Drivers	informazioni sulla liberatoria	File tipo	Dimensioni
Add-On Instructions for RSLogix/Studio 5000 / Add-On-Befehle für RSLogix/Studio 5000	4/2020	ZIP	23385 KB

Prodotti associati : VBA-4E3A-G20-ZEL/M1L-P2

Accessories

	VBP-HH1-V3.0-KIT AS-Interface Handheld with accessory
	AS-Interface Handheld with accessoryfa

	VAZ-G10-TERM Terminal resistor
	Passive bus termination G10fa

	VAZ-PK/G20-1M-V1-G Adapter cable G20 module/hand-held programming device
	Adapter cable G20 module/hand-held programming devicefa

	VAZ-G20-MH Mounting aid
	Mounting aidfa

	VAZ-G10-LIMITER Voltage limiter
	Voltage limiter G10fa

	V311-GR-BK1M-PUR-U-V311-GR Connection cable
	Cordset M8 socket snap-lock straight to M8 plug snap-lock straight B-coded, 5-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

	V311-GR-BK2M-PUR-U-V311-GR Connection cable
	Cordset M8 socket snap-lock straight to M8 plug snap-lock straight B-coded, 5-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa

Informazione generale sul prodotto

Download gratuito: White paper sui protocolli di comunicazione basati su TCP (PDF)

Questo white paper gratuito in formato PDF confronta i diversi protocolli di comunicazione basati su TCP (AMQP, OPC UA, MQTT, REST API) che si sono fatti strada fino a diventare indispensabili per IIoT e Industry 4.0. Scaricalo ora gratuitamente!

Modulo per quadri elettrici KE5 con AS-Interface – Semplicità di gestione e migliore maneggevolezza

L'esclusivo design della custodia del nuovo modulo per quadri elettrici KE5 consente una buona visibilità e semplifica le operazioni di montaggio, cablaggio e manutenzione all'interno di quadri elettrici e scatole di derivazione.

Scarica la Panoramica dei prodotti AS-Interface

Cogli l'opportunità per conoscere la gamma completa dei prodotti AS-Interface.

Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
phone +39 039 69599 1

Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
phone +39 039 62921

Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.