Comunicazione industriale

Non acquistabile

Il prodotto è obsoleto.Visualizzare l'alternativa VBA-2E2A-G12-ZAJ/EA2L

Aggiungi all' Elenco Preferiti

AS-Interface sensor/actuator module VBA-2E2A-G2-ZA/EA2

AS-Interface certificate
Degree of protection IP67
A/B node with extended addressing possibility for up to 62 nodes
Addressing jack
Flat cable connection with cable piercing technique, variable flat cable guide
Communication monitoring
Inputs for 2-, 3-, and 4-wire sensors
Power supply of outputs from the external auxiliary voltage
Supply for inputs from AS-Interface
Ground connection (FE) possible
Function display for bus, ext. auxiliary voltage, inputs and outputs
Detection of overload on sensor supply
Detection of output overload

Technical Data
Product Documentation
Design / Simulation
Approvals
Prodotti associati
Chiedi ad un esperto

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:

Estratto del Datasheet: Dati tecnici del VBA-2E2A-G2-ZA/EA2

Descrizione prodotto
G2 flat module 2 inputs (PNP) and 2 electronic outputs

General specifications
Node type		A/B node
AS-Interface specification		V2.1
Required gateway specification		≥ V2.1
UL File Number		E223772
Indicators/operating means
LED FAULT		error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or outputs
LED PWR		AS-Interface voltage; LED green
LED AUX		ext. auxiliary voltage U_AUX; LED green
LED IN		switching state (input); 2 LED yellow
LED OUT		Switching state (output); 2 LED yellow
Electrical specifications
Auxiliary voltage (output)		20 ... 30 V DC PELV
Rated operating voltage		26.5 ... 31.6 V from AS-Interface
Rated operating current		≤ 40 mA (without sensors) / max. 140 mA
Protection class		III
Surge protection		U_AUX, U_in: Over voltage category III, safe isolated power supplies (PELV)
Input
Number/Type		2 inputs for 2- or 3-wire sensors (PNP), DC option 1 input for 4-wire sensor (PNP), DC
Supply		from AS-Interface
Voltage		21 ... 31 V
Current loading capacity		≤ 100 mA (T_B ≤ 40 °C), ≤ 75 mA (T_B ≤ 60 °C), overload-proof and short-circuit protected
Input current		≤ 8 mA (limited internally)
Switching point		according to DIN EN 61131-2 (Type 2)
	0 (unattenuated)	≤ 2 mA
	1 (attenuated)	≥ 4 mA
Output
Number/Type		2 electronic outputs, PNP overload and short-circuit proof
Supply		from external auxiliary voltage U_AUX
Voltage		≥ (U_AUX - 0.5 V)
Current		1 A per output
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 62026-2:2013 EN 61000-6-2:2001 EN 61000-6-4:2001
Standard conformity
Degree of protection		EN 60529:2000
Input		EN 61131-2:2007
Emitted interference		EN 61000-6-4:2001
AS-Interface		EN 62026-2:2013
Noise immunity		EN 61000-6-2:2001
Programming instructions
Profile		S-B.A.2
IO code		B
ID code		A
ID1 code		7
ID2 code		2
Data bits (function via AS-Interface)		InputOutput
	D0	- OUT1
	D1	- OUT2
	D2	IN3 -
	D3	IN4 -
Parameter bits (programmable via AS-i)		function
	P0	not used
	P1	not used
	P2	not used
	P3	not used
Ambient conditions
Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Relative humidity		85 % , noncondensing
Climatic conditions		For indoor use only
Altitude		≤ 2000 m above MSL
Pollution degree		3
Mechanical specifications
Degree of protection		IP67
Connection		Cable piercing method flat cable yellow/flat cable black inputs/outputs: M12 round connector
Material
	Housing	PBT
Mass		100 g
Tightening torque, cable gland		0.4 Nm
Mounting		Mounting plate

Classifications

System	Classcode
ECLASS 13.0	27242604
ECLASS 12.0	27242604
ECLASS 11.0	27242604
ECLASS 10.0.1	27242604
ECLASS 9.0	27242604
ECLASS 8.0	27242604
ECLASS 5.1	27242604
ETIM 9.0	EC001599
ETIM 8.0	EC001599
ETIM 7.0	EC001599
ETIM 6.0	EC001599
ETIM 5.0	EC001599
UNSPSC 12.1	39121535

Details: VBA-2E2A-G2-ZA/EA2

Product Documentation: VBA-2E2A-G2-ZA/EA2

Brief Instructions	Lingua	File tipo	Dimensioni
Instruction leaflet / Beipackzettel	ALL	PDF	188 KB

Design / Simulation: VBA-2E2A-G2-ZA/EA2

CAD	Lingua	File tipo	Dimensioni
CAD 3-D / CAD 3-D	ALL	STP	149 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: VBA-2E2A-G2-ZA/EA2

Certificates	Certificato Numero	Lingua	File tipo	Dimensioni
Canada, USA UL	CoC 20141115-E223772	ALL	PDF	342 KB
Worldwide AS-International Association AS-Interface	38701	ALL	PDF	605 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-1018C	ALL	PDF	118 KB

Prodotti associati : VBA-2E2A-G2-ZA/EA2

Matching System Components

	U-G3FF AS-Interface module mounting base
	AS-Interface module mounting base for connection to flat cable (AS-Interface and external auxiliary power)fa

Accessories

	VBP-HH1-V3.0-KIT AS-Interface Handheld with accessory
	AS-Interface Handheld with accessoryfa

	VAZ-PK-1,5M-V1-G Adapter cable module/hand-held programming device
	Adapter cable module/hand-held programming devicefa

Informazione generale sul prodotto

Download gratuito: White paper sui protocolli di comunicazione basati su TCP (PDF)

Questo white paper gratuito in formato PDF confronta i diversi protocolli di comunicazione basati su TCP (AMQP, OPC UA, MQTT, REST API) che si sono fatti strada fino a diventare indispensabili per IIoT e Industry 4.0. Scaricalo ora gratuitamente!

Modulo per quadri elettrici KE5 con AS-Interface – Semplicità di gestione e migliore maneggevolezza

L'esclusivo design della custodia del nuovo modulo per quadri elettrici KE5 consente una buona visibilità e semplifica le operazioni di montaggio, cablaggio e manutenzione all'interno di quadri elettrici e scatole di derivazione.

Scarica la Panoramica dei prodotti AS-Interface

Cogli l'opportunità per conoscere la gamma completa dei prodotti AS-Interface.

Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
phone +39 039 69599 1

Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
phone +39 039 62921

Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.